Single Point/Single Function

Compare DynaCHARGE™ Models »

Instrument Platform

FilterSense’s instrument platform provides cutting-edge design and leading value for single point instrumentation (line powered alarm devices and loop powered transmitters – HART available).

Industry leading technology includes accurate low level sensing and true automatic zero, and span measurements (for EPA self-tests) under the low power constraints of a loop power device.

Mechanical features include modular display, removable electronics module, water intrusion protection, custom housing (rotatable with multiple conduits), heavy-duty modular sensor, and both integral one-piece instruments (shown) and remote electronics.

instrument-platform

PRO Models

PRO models have value-added technology for demanding optimization and up time requirements of process plants, quality assurance features and accuracy requirements for EPA compliance, heavy-duty construction for long life in harsh conditions, and highest hazardous area ratings. Basic models offer a lower price yet still provide essential functions and high quality.

Advanced Features

Device & Process Diagnostics
Device health diagnostics (to NAMUR 107), such as ground and power quality checks, ensure proper installation while process diagnostics such as real-time signal analysis provide service alerts and insight into process occurrences.

Internal Data & Event Logging
Logging of process values, alarms, EPA self-tests, and events goes beyond record keeping or data redundancy. It provides added insight for faster decision making and better remote support.

EPA QA and Accuracy
Self-test circuits (zero, upscale/span, linearity and sensor condition), and high precision options enable meeting EPA quality assurance, and relative mass accuracy specifications in standards such as, but not limited to, ASTM D7392 and EN 15859.

Communications
Certified fieldbus protocols, industrial Ethernet, HART, 4-20mA (to NAMUR 43), USB, and SD cards provide efficient ways to manage devices, take full advantage of available information, and better control processes.

Heavy-Duty Construction

PRO electronics can operate from -40 °F (-40 °C) to 158 °F (70 °C), and with critical circuits conformal coated, can be installed in dusty and corrosive environments. All PRO sensing probes are engineered to withstand the rigors of 24/7/365 operation in harsh processes while not overlooking less known but critical factors, such as flow-induced vibration fatigue

Hazardous Areas

PRO remote control units offer built-in intrinsic safety barriers to directly connect PS Series particulate sensors for intrinsically safe installations (all classes/zones/groups). PRO loop powered transmitters with integral electronics (i.e., one-piece devices) are also available intrinsically safe.

Compare

Key FeaturesPM 100 PROPM 100PM 1 PROPM 1
Function/# of MonitoringMulti-Function / MultiPointSingle-Function / Singlepoint
Expandable Modular Platform (MICS™)
Distributed System Controller
# of Channels1 to 321 to 1611 to 16
Alarm Capabilities
On-Screen Trending
Data Logging
NAMUR DiagnosticsNE 107/043NE 107/043
Calculated Variables
Application
Measure (Compliance)
Monitor (Maintenance)
Detect (BLDS)
Large Stack
Multi-Compartment Baghouse
Single Compartment Process Baghouse
Nusiance Dust Collector
Process Flow/Injection Lines/Cyclones
Other; Mist Eliminator/ESP
Technical Data
Power Supply110-220 VAC (or) 24 VDC110-220 VAC (or) 24 VDC110-220 VAC (or) 24 VDC2-Wire Loop Power
Processor/DisplayAdvanced Color GraphicBasic MonochromeBasic LCDBasic Monochrome
CommunicationsFieldbus¹Fieldbus¹HART/Modbus TCU/Canbus
Resolution/Minimum Detection<1mg / mg³1-5mg / mg³<1mg / mg³1-5mg / mg³
Discrete Output(2) SPST 5A @ 24 VAC(2) SPST 5A @ 24 VAC
Analog OutputUp to 8Up to 4(1) 4-20 mA isolated(1) 4-20 mA isolated
Analog & Discrete InputsUp to 8 eachUp to 4 each
Ambient Temperature-40°F to 158°F (-25°C to 70°C)-13°F to 140°F (-25°C to 60°C)-40°F to 158°F (-40°C to 70°C)-13°F to 140°F (-25°C to 60°C)
Process Temperature (Sensor)-40°F to 1598°F (-40°C to 870°C)-13°F to 500°F (-25°C to 260°C)-40°F to 500°F (-25°C to 260°C)-40°F to 1598°F (-40°C to 870°C)
Process Pressure (Sensor)200 PSI (138 Bar)50 PSI (3.4 Bar)2000 PSI (138 Bar)50 PSI (3.4 Bar)
Enclosure RatingNEMA 4XNEMA 4NEMA 4XNEMA 4X
Hazardous Area RatingClass I Div. IClass II Div. IIClass I Div. IClass II Div. II